Paradyne ACCULINK 3161 CSU - Manual (Page 18)

16
Table 9. General Management Configuration Options (2 of 2)
Option Comments/Description Factory 2 Factory 1
IP Adr:
Edit Edit
The IP address needed to access
IP Adr:
Clear Clear
The IP address needed to access
the device.
NetMask:
Edit Edit
The Subnet Mask needed to
NetMask:
Clear Clear
The Subnet Mask needed to
access the device.
Com IP Adr:
Edit Edit
The IP address for the COM port
Com IP Adr:
Clear Clear
The IP address for the COM port
when configured for SNMP.
Com NetMask:
Edit Edit The Subnet Mask needed to
access the device when the COM
Com NetMask:
Clear Clear
access the device when the COM
port is configured for SNMP.
Com Link:
PPP PPP
The link layer protocol for the COM
Com Link:
SLIP SLIP
The link layer protocol for the COM
port when configured for SNMP.
IPBusMast:
Enable Enable
Specifies whether the device is the
IPBusMast:
Disab Disab
Specifies whether the device is the
IP Bus Master.
None None
IPBus IPBus
Def Netwk: Com Com
Specifies the default network
destination.
Def Netwk:
FDL FDL
destination.
EDL n EDL n