Pentax Optio 330 - Manual (Page 54)

52
T
aking Pictures
Saving the Settings (Memory)
You can choose whether you want the set values to be saved when the
camera is turned off. If you select
(On), the settings will be saved in
the status they were in immediately before the camera was turned off. If
you select
(Off), the settings will be reset to the defaults.
Item Description Default Setting
Flash
White Balance
Focusing Area
Digital Zoom
AE Metering
ISO Speed
MF Position
Display
File No.
z
Press the Menu button in Capture
mode.
x
Press the four-way controller ( ).
The [Memory] menu will be dis-
played.
c
Use the four-way controller (
) to select the item.
v
Use the four-way controller (
) to switch and .
b
Press the OK button.
The camera is ready to take the picture.
The setting on the button is saved.
The [White Balance] setting on the [Rec.Mode] menu is
saved.
The [Focusing Area] setting on the [Rec.Mode] menu is
saved.
The [Digital Zoom] setting on the [Rec.Mode] menu is
saved.
The [AE Metering] setting on the [Rec.Mode] menu is
saved.
The [ISO Speed] setting on the [Rec.Mode] menu is
saved.
The focus position set by Manual Focus is saved and
restored when Manual Focus is next selected.
The LCD monitor display mode is saved.
The file number is saved. If a new CF card is inserted,
the sequential file number is assigned.
2048
×
1536
MENU OK
Rec.Mode Memory Set-up
1/3
Resolution
Quality Level
White Balance
Auto
Wide
On
Exit
Focusing Area
Digital Zoom
Ok
MENU OK
Memory
Flash
White Balance
Focusing Area
Exit
Digital Zoom
AE Metering
Ok
Rec.Mode Set-up
1/2