Panasonic CF-T2 Series - Manual (Page 30)

30
Security Measures
4
Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press
Enter .
5
Enter your password at [Enter New Password] and press Enter .
z To disable the Supervisor Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter .
z To disable the Supervisor Password
Press only Enter.
7
At [Setup Notice], press Enter .
8
Press F10 and select [Yes], then press Enter .
CAUTION
z Do not forget your password. If your Supervisor Password is forgotten, you will be
unable to use your computer. Contact your technical support office.
z When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
z Your password will not be displayed on the screen.
z Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on
Shift or Ctrl.
z Disabling the Supervisor Password also disables the User Password.