Philips FW-V55 - Manual (Page 20)

3139 115 20042
20
English
TUNER TAPE
Changing the MW tuning grid
(for specific version only)
The frequency step can be changed if
necessary. In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz. In other parts of
the world, it is 9 kHz. The frequency step
preset in the factory is 9 KHz.
For MW Band
To change from 9 kHz to 10 kHz or vice
versa
Changing of tuning grid will erase all
previously stored preset stations.
1 Disconnect the system from the AC
power supply (pull out the AC power
cord).
2 Press and hold TUNER and TUNING
á while reconnecting the system to
the AC power supply.
™ Display will show "GRID 10" or
" GRID 9".
Notes:
– GRID 9 indicates that the tuning grid is
in step of 9 kHz in MW band. GRID 10
indicates that the tuning grid is in step
of 10 kHz in MW band.
– FM tuning grid will also be changed
from 50 kHz to 100 kHz or vice versa. All
preset stations will also be erased.
STEREO BACK HSD
SHUFFLE PROGRAM REC LW NEWS TIMER FM REPEAT MW AM T.A.
DUB (HSD)
REC
FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
INCREDIBLE
SURROUND DYNAMIC BASS
BOOST
TAPE
PROG
CLOCK/
TIMER
TUNER AUX
PRESET ▲ ▲
STOP•CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
C D 1 • 2 • 3 CDR/VIDEO BAND TAPE 1 • 2
DIGITAL SOUND CONTROL
A. REV
STANDBY
ON
SIDE
SOUND NAVIGATION
VCD
RETURN
PBC
MP3•CD
ALBUM MP3-CD + - TITLE + -
VCD MINI HIFI SYSTEM
MIC
MIC LEVEL
Loading a tape
1 Press OPEN.
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the left.
4 Close the tape deck door.
pg 01-28/V55/21-En 6/8/01, 9:11 AM 20