Philips FW-V55 - Manual (Page 11)

3139 115 20042
11
English
OPERATING THE SYSTEM
FM
STEREO BACK HSD REC LW MW AM T.A. NEWS
INCREDIBLE
SURROUND DYNAMIC BASS
BOOST
TAPE
PROG
CLOCK/
TIMER
DUB (HSD )
REC
TUNER AUX
PRESET ▲ ▲
STOP•CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
C D 1 • 2 • 3 CDR/VIDEO BAND TAPE 1 • 2
FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
SHUFFLE PROGRAM
DIGITAL
SOUND CONTROL
REPEAT
A. REV
STANDBY
ON
SIDE
SOUND NAVIGATION
VCD
RETURN
PBC
MP3•CD
ALBUM MP3-CD + - TITLE + -
VCD MINI HIFI SYSTEM
MIC
MIC LEVEL
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system.
When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume 5 seconds later.
To stop the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY ON (on the
system only) for 5 seconds; when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed,
and followed by " TUNER" and then
" AUTO".
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band, if
there are still presets available, the
system will continue to store the MW
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will appear
on the display when EASY SET is
completed.
Switching the system ON
• Press VCD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the DISC DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: VCD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX/
CDR IN terminals.
pg 01-28/V55/21-En 6/8/01, 9:11 AM 11