Philips FW-V55 - Manual (Page 14)

3139 115 20042
14
English
CD / VCD / MP3-CD
Discs for playback
This system can playback all audio CD,
finalized audio CD-Recorder and MP3-CD
format discs.
Note:
– For mixed mode discs, only one mode
will be selected for playback depending
on the recording format.
Loading the Disc Changer
1 Press VCD to select VCD/CD/MP3-CD
mode.
2 Press OPEN•CLOSE.
™ The disc carousel tray slides out.
3 Load a disc with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
™ The disc carousel tray will rotate
until the empty tray is ready for
loading.
™ Playback will always start with the
disc in the inner disc tray.
4 Press OPEN•CLOSE to close the disc
carousel tray.
™ The total number of tracks and the
playing time of the last selected disc
appear on the display.
For MP3-CD only:
™ The first Album and the first Title
information appear on the display.
Notes:
– To ensure good system performance,
wait until the disc changer completely
reads the disc(s) before proceeding.
– For MP3-CD, the disc reading time may
exceed 10 seconds due to the large
number of songs compiled into one disc.
Disc Direct Play
You can play a disc directly by pressing the
DISC 1, DISC 2 or DISC 3 button.
Playing a normal disc
For normal VCD:
Ensure that the system is switched to
the corresponding PAL or NTSC
system of your TV set (except multi-
system TV).
1 Press PLAYÉÅ to start playback.
™ The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, press PAUSE
ÉÅ.
™ The playing time flashes.
• To resume playback, press PLAYÉÅ
again.
2 To stop playback, press Ç.
Note:
– During Disc Reading mode, if you press
any button, "PLEASE WAIT" will
be displayed.
Disc Change
You can change the outer two discs while
the third inner disc is stopped or is playing.
1 Press DISC CHANGE.
™ The disc carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
• If you press DISC CHANGE again
during playback, the disc will stop
playing.
™ The disc carousel tray will rotate
until the inner tray is rotated out and
is ready for changing.
3 Press OPEN•CLOSE to close the disc
carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
• Press digit 0 – 9 on the remote control
to select the desired track.
™ Playback will start immediately for
the selected track.
™ The selected track number and
elapsed playing time appear on the
display.
Selecting a desired track during
playback
• Press í or ë
(or digit 0-9 on the
remote control) until the desired track
appears on the display.
™ The selected track number and
elapsed playing time appear on the
display.
• If you press í once it will skip to the
beginning of the previous track and play
the track.
For MP3-CD only
1 Press ALBUM -
- - - -/+ + + + + (à or á) until
the desired Album appears on the
display
(when playback is stopped).
2 Press TITLE - - - - -/+ + + + + (í or ë) until
the desired Title appears on the display.
™ The selected track number and
elapsed playing time appear on the
display.
3 Press PLAYÉÅ to start playback.
pg 01-28/V55/21-En 6/8/01, 9:11 AM 14