Operating with the unit, Press menu, Press the cursor / key to select “source menu – Plus Corporation UP-1100 User Manual
Page 21: Press l-click, Press r-click to turn off the menu dis- play
E – 21
B a s i c o p e r a t i o n ( S e l e c t i n g t h e i n p u t s o u r c e )
M e n u o p e r a t i o n
L-CLICK button
(At the back of
the remote
control)
Cursor key
R-CLICK button
MENU button
1
Press MENU.
The button lights in red and the main menu
appears on the screen.
If you don’t proceed to step
2
within ten seconds,
the button goes off.
2
Press the cursor / key to select
“SOURCE MENU.”
3
Press L-CLICK.
The source menu appears on the screen.
4
Press the cursor / key to select the
desired input source.
MENU
MENU
Note
The menu will not be dis-
played if the picture is en-
larged even slightly. In
such a case, reduce the pic-
ture size to normal before
starting the menu opera-
tion.
+
–
+
–
5
Press L-CLICK.
The source you’ve selected in step
4
will be
confirmed, then the picture from the selected
source will be projected on the screen.
6
Press R-CLICK to turn off the menu dis-
play.
Whenever you wish to turn off the menu display,
press R-CLICK button.
Operating with the unit
R-CLICK
The menu operation is explained using the remote control, how-
ever, it can also be controlled with the unit operation buttons.
To operate with the unit, refer to the comparison table below.
The remote control and unit button comparison table
STATUS
MENU
SELECT
ADJUST
ENTER
POWER
MENU
button
ENTER button
SELECT button
ADJUST +/–
buttons
Remote control buttons
MENU
The main menu appears on
the screen when you press
this button.
To turn off any menu, press
R-CLICK.
Cursor
/
key
Press either key to select the
menu item.
L-CLICK
Press this button whenever
confirming operation is re-
quired.
Cursor + / – key
Press either key to choose
the setting or value of the
selected menu item.
Unit operation buttons
MENU
The main menu appears on the
screen when you press this
button.
To turn off any menu, press R-
CLICK on the remote control.
SELECT
Each press change the menu
item to the next.
ENTER
Press this button whenever
confirming operation is re-
quired.
ADJUST + / –
Press either button to choose
the setting or value of the se-
lected menu item.
SOURCE MENU
IMAGE ADJ MENU
POWER MENU
SETTING MENU
SOURCE MENU
IMAGE ADJ MENU
POWER MENU
SETTING MENU
VIDEO
S-VIDEO
RGB
STANDARD
VIDEO
S-VIDEO
RGB
STANDARD
PLUS
VIDEO
RGB
MENU
R-CLICK
LASER
MAGNIFY
VOLUME
S-VIDEO
POSITION
MUTE
FREEZE
+
–
+
–
+
–
OFF
ON
POWER