Plus Corporation UP-1100 - Manual (Page 20)

E – 20
V a r i o u s f u n c t i o n s w h i l e u s i n g t h e D a t a P r o j e c t o r
( c o n t i n u e d )
Enlarging the picture
You can enlarge the picture up to four times the normal size.
Press MAGNIFY +.
While the button is pressed the picture is en-
larged until it becomes four times the normal
size.
Release the button at the desired size.
To reduce the size of the enlarged picture
Press MAGNIFY –.
While the button is pressed the picture is reduced
until it becomes the normal size.
MAGNIFY
+
–
MAGNIFY
+
–
Normal size
Four times as large
as the normal size
Enlarged size Normal size
To move to the desired portion of the enlarged
picture
1
Press POSITION.
The button lights in red. If you don’t proceed to
step
2 within ten seconds, the button goes off.
2
Press the desired portion of the cursor
key while POSITION lights.
The moving directions are indicated by the eights
triangle marks on the cursor key. The picture will
move in the direction pointed by the mark where
you are pressing.
Note
The normal size of the picture cannot be moved because the
whole image is fully displayed.
POSITION POSITION
+ –
Move upward
Move downward
Move leftward Move rightward
Cursor key
POSITION button
MAGNIFY button
PLUS
VIDEO
RGB
MENU
R-CLICK
LASER
MAGNIFY VOLUME
S-VIDEO
POSITION MUTE FREEZE
+
–
+ –
+
–
OFF ON POWER