5 ip configuration – Planet Technology SGSW-4802 User Manual

Page 10

Text mode
Original mode

minal program may be a good choice. It can be accessed from the Start menu. Click START, then
Programs, Accessories and then Hyper Terminal.
MS-DOS based terminal program such as PC-PLUS, PROCOMM, can also make the connection with
the device built-in software. The COM port should be configured as:

♦ Baud

: 38400

♦ Parity

: None

♦ Data bits : 8

♦ Stop bits : 1

♦ Flow Control: none

Once the terminal has connected to the device, power on the device. The terminal will display that it is
loading the firmware. Then, the screen as below will show up:

Press

“Enter” and input the password. The default password is “admin”.

2.5 IP Configuration

Once log on to the console, the

“Command>” prompt will be shown. You can type, “help” for all

available commands.