Pentax Optio S50 - Manual (Page 80)

78
4
T
aking
Pictu
res
Saving the Settings
You can choose whether you want the set values to be saved when the
camera is turned off. If you select O (On), the settings will be saved in the
status they were in immediately before the camera was turned off. If you select
P
(Off), the settings will be reset to the defaults when the camera is turned off.
Saving the Menu Items (Memory)
Item Description
Default
Setting
Flash The flash mode setting on the b button is saved. O
White Balance
The [White Balance] setting on the [A Rec. Mode]
menu is saved.
P
EV Compensation
The [EV Compensation] setting on the
[A Rec. Mode] menu is saved.
P
Focusing Area
The [Focusing Area] setting on the [A Rec. Mode]
menu is saved.
P
AE Metering
The [AE Metering] setting on the [A Rec. Mode]
menu is saved.
P
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu
is saved.
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec. Mode]
menu is saved.
O
Focus Mode
The optical focus mode setting on the ) button is
saved.
P
Zoom Position The optical zoom position on the Zoom button is saved. P
MF The manual focus position is saved. P
DISPLAY The LCD monitor display mode is saved. P
File #
The file number is saved. If a new SD Memory Card is
inserted, file numbers are assigned sequentially.
O
• Menu items not included in [Memory] will also be saved in the settings
selected on the menus for each function when the camera is turned off.
• The zoom position setting in the digital zoom range will not be saved
even if [Zoom Position] is set to O (On) in [Memory].
• Setting [MF] to O (On) sets [Zoom Position] to O (On) at the same time.
([Zoom Position] can also be set to O (On) independently of [MF].)
e_kb376.book Page 78 Tuesday, August 10, 2004 1:46 PM