Pentax Optio S50 - Manual (Page 125)

123
7
Settings
1
Align the mode dial with one of the
following; d , R , + , . , H , =.
2
Press the 0 button in Capture
mode.
The functions registered on the four-way
controller (2345) appear.
3
Use the four-way controller
(2345) to choose the registered function and
change the setting.
Pressing the DISPLAY button when EV Compensation is registered on
the four-way controller displays a histogram showing the EV setting.
(1p.77)
To adjust the white balance, select K (manual) and press the OK
button when White Balance is registered. (1p.68)
4
Press the 0 button or the shutter release button.
The setting is saved and the camera is ready to take pictures.
• EV Compensation (+) and (–) must be registered as a pair, with (+) on
2 and (–) on 3, or (–) on 4 and (+) on 5. It is not possible to register
only EV Compensation (+) or (–), or to reverse the plus/minus
functions.
• Functions cannot be registered in - (Auto Select) mode.
Retrieving a Function
• You cannot access functions by pressing the 0 button in - (Auto
Select) mode, O (Voice Recording) or C (Movie).
• Pressing the 0 button in - (Auto Select Mode) displays the Help
screen. (1p.41)
mm/dd/yy
O n
O f f
E n g l i s h
F o r m a t
S o u n d
D a t e A d j u s t
W o r l d T i m e
S c r e e n S e t t i n g
S e t - u p
MENU OK O K O K O K E x i t E x i t E x i t
2304 2304 2304
+0.7 +0.7 +0.7
Fn
e_kb376.book Page 123 Tuesday, August 10, 2004 1:46 PM