White balance, Manual shutter speed adjustment, Manual iris adjustment – Panasonic AG-DVG7P User Manual
Page 44: Picture effect functions, Adjusting the microphone sensitivity level, Playing back, Index search functions
44
O
O
O
O
tt
tt
h
h
h
h
e
e
e
e
rr
rr
s
s
s
s
44
O
O
O
O
tt
tt
h
h
h
h
e
e
e
e
rr
rr
s
s
s
s
44
O
O
O
O
tt
tt
h
h
h
h
e
e
e
e
rr
rr
s
s
s
s
Notes and Hints
$
White Balance
In the following cases, you cannot change White
Balance:
O
When you set the Picture Effect to [GAIN-UP],
[SEPIA] or [MONO].
O
When you set the Zoom to 15a or higher
O
During Digital Still Picture Mode
O
When you display a Menu
In the following cases, the [
] Indication
flashes:
O
The flashing indicates that the previously adjusted
White Balance setting is still kept.
This setting will be kept until White Balance is
adjusted again.
O
You may not be able to achieve correct White
Balance Adjustment manually under weak
illumination.
$
Manual Shutter Speed Adjustment
O
You may see vertical lines of light in the playback
image of a brightly shining subject or highly
reflective subject.
O
During normal playback, movement in the images
may not look smooth.
O
Because the color and brightness of the playback
image may become unstable, avoid recording under
fluorescent light, mercury light or sodium light.
O
If you are using either Gain-up Mode (-29-) or
Program AE Mode (-26-), you cannot adjust the
shutter speed. If the shutter speed was adjusted
manually, this setting will be cancelled.
$
Manual Iris Adjustment
O
Depending on zoom magnification, there are iris
values that will not be displayed.
O
If you are using Program AE Mode (-26-), you
cannot adjust the iris.
O
If you attempt to adjust the Shutter Speed after
setting the Iris, the value set for the Iris will be
cancelled.
$
Picture Effect Functions
O
If the Picture Effect is set to [WIPE], [MIX] or
[TRAIL] with [PIC.E.] Button, the setting of [NEGA],
[SEPIA], [MONO] or [SOLARI] is canceled.
O
If you have set the Picture Effect to [MONO] or
[SEPIA], changing the selected White Balance
Mode is not possible. (-27-)
O
If the Picture Effect is set to [GAIN-UP], the
previously adjusted shutter speed is canceled.
It is as follows when [GAIN-UP] is selected.
O
Manual Focus Mode
O
The shutter speed and White Balance cannot be
operated.
O
The Sports Mode [
], the Portrait Mode [
] and
Low Light Mode [ ] are cancelled.
Wipe Mode and Mix Mode
If either one of the following operations is carried out,
stored images will be erased, and Wipe and Mix
Functions cannot be used.
O
Use the Camera Search Function
O
Press the [STILL] Button
$
Adjusting the Microphone Sensitivity
Level
O
When this setting is changed, the [AUDIO LEVEL]
setting on the [RECORDING SETUP] Sub-Menu of
the [VCR FUNCTIONS] Main-Menu will likewise be
changed.
O
When [ZOOM MIC] is set to [ON], set the zoom to
the [T] position before performing this adjustment.
O
Select a lower setting for [GAIN] or set [MIC
LEVEL] to [AUTO].
O
It is recommended that you check through the
headphones before recording to ensure that the
sound is not distorted.
$
Playing Back
Repeat Playback
If you continue to press the [1] Button for 5 seconds
or longer, the Camera Recorder switches to Repeat
Playback Mode, and the [R!] Indication appears. (To
cancel Repeat Playback Mode, set the [OFF/ON]
Switch to [OFF].)
Listening to Playback Sound through Headphones
If you want to use the headphones to listen to the
playback sound, connect the headphones to the
[PHONES] Socket (-8-) on the Camera Recorder. In
this case, no sound (including a warning sound and
shutter sound) will be reproduced through the built-in
speaker of the Camera Recorder.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT]
setting on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
O
If you dub a tape recorded at the [12bit] selected as
the [AUDIO REC] on the [RECORDING SETUP]
Sub-Menu, playback sound becomes stereo sound
regardless of the [AUDIO OUT] setting if [12bit
AUDIO] is set to [MIX].
$
Index Search Functions
O
Index Search may not be possible at the beginning
of tape.
O
Because Photoshot Index Signals are not recorded
on still pictures recorded in Continuous Photoshot
Mode, the Photoshot Index Search Function cannot
be used for these still pictures.
O
Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter
than 1 minute.