Polycom PDS 725-78600-002A2 - Manual (Page 9)

Polycom, Inc. 5
2
Polycom Digital Signage Server
Hardware Setup
This chapter explains how to set up the Polycom Digital Signage (PDS) Server
as part of the Polycom Digital Signage solution. This chapter includes the
following sections:
•
Hardware Installation Procedures
• Safety Notice and Warnings
• Ratings
• Electrical and General Safety Guidelines
• Unpacking the Appliance
• Site Preparation
• Rack Installation
• Rear Panel Connections
• Front Panel Operation
Hardware Installation Procedures
To configure the PDS Server appliance as part of the Polycom Digital Signage
solution, you must have a:
• PC to initialize and configure the PDS Server appliance.
• Ethernet cable to connect the PC to the PDS Server appliance.