Polycom PDS 725-78600-002A2 - Manual (Page 20)

Polycom Digital Signage Server Getting Started Guide Rack Installation
16 Polycom, Inc.
• Tighten each of the the single screws on the small fixed brackets (located
on either side of the rack) to secure the brackets in the rack and ensure
appliance stability.
Step 3
• Align the fixed chassis rails on the appliance with the fixed rack rail
brackets installed in the rack.
• Carefully slide the appliance into the rack until you hear the locking tabs
on each side of the fixed front rails click into place.
• Push the appliance all the way back into the rack until it stops. Secure the
unit in the rack using a 10-32 x 3/4" truss head screw in the center hole on
each rail.
M5 x 12
flat head screws *
(two front and rear)
A
A
A
A
B
B