ParaBody Hip Sled System - Manual (Page 9)

FIGURE 5
STEP 5:
9
• LOOSELY assemble the LEFT (8) and RIGHT RAILS (9), along with the SEAT PAD (18) to the BASE (1) as shown in FIGURE 5
using two 3/8 X 4-1/2” BOLTS (38), two 3/8” LOCK WASHERS (30), and two 3/8” WASHERS (29). Temporarily assemble the
RAILS to the REAR UPRIGHT (6) using two 1/2 X 4-1/2” BOLTS (43) to aid in the assembly of this step.
43 1/2 X 4-1/2”
3/8 X 4-1/2” 38
30 29
1
18
8
9
6