ParaBody Hip Sled System - Manual (Page 10)

FIGURE 6
STEP 6:
10
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
• Insert four 2” SQ. END CAPS (26) into the each end of the CARRIAGE (16) as shown in FIGURE 6.
• SECURELY assemble four 3” DIA. WHEELS (20) to the sides of the CARRIAGE (16) as shown in FIGURE 6 using four 1/2 X
4-1/2” BOLTS (43), eight 1/2” WASHERS (32), and four 1/2” LOW HEIGHT LOCK NUTS (34).
32
16
1/2 X 4-1/2” 43
34 LOW
HEIGHT
26
25
20
32
• Attach one 4 X 14” NON SKID STRIP (25) to the CARRIAGE (16) as shown in FIGURE 6.