Recording mode, Connecting using the s-video output, Other connections 11 – Pioneer S-DV900ST User Manual

Page 74

Other connections

Recording mode

The Recording mode allows you to make
analog recordings from the

LINE 1 (OUT)

jacks.

When Recording mode is on, most sound-
related functions (including

SURROUND

ADVANCED

AUTO

SYSTEM SETUP

)

become inactive. The display will briefly blink

RecMode On

if you try and use a prohibited

function while Recording mode is on.

When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.

Press SOUND.

Use the

(cursor left/right)

buttons to select ‘Rec Mode?’.

Press ENTER.

Use the

(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.

• When Recording Mode is

a stereo

downmix of multi-channel DVD-Audio
and SACD discs is output from the
speakers and from the analog audio
jacks. Note that with some DVD-Audio
disc, only the front left/right channels are
output. When set to

Off

, multi-channel

DVD-Audio and SACD discs are played
through all the speakers, but front L/R
audio is output from the analog audio
jack.

• When

R.Mode On

is selected while

playing SACD, the unit will loose speaker
SW output and bass will become
inaudible.

Connecting using the S-video
output

If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.

•

Use an S-video cable (not supplied) to

connect the S-VIDEO OUT to an S-video
input on your TV.

Line up the small triangle above the jack with
the same mark on the plug before plugging
in.

• The S-video ouptut is switchable between

S1 and S2 formats for compatibility with
all TVs. See

S-Video Out

on page 65 for