Pioneer S-DV900ST - Manual (Page 40)

Playing discs 05
40
En
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD-Video and DVD-RW)
that form a loop which is played over and over.
• You can’t use A-B Repeat with MP3 discs,
DVD-Audio, SACD, Super VCD discs,
Video CDs in PBC mode or unfinalized
CD-R/RW discs.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘A-B Repeat’ from the list of
functions on the left.
3 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
4 Press ENTER on ‘B(End Point)’ to set
the loop end point.
After pressing ENTER , playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
5 To resume normal playback, select
‘Off’ from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see
Creating a program list
on page 43).
• You can’t use Repeat play with Video CD/
Super VCDs in PBC mode, or unfinalized
CD-R/RW discs.
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
NS03_ZFL.book 40 ページ ２００３年７月３１日 木曜日 午後７時０分