Pioneer S-DV900ST - Manual (Page 63)

Initial Settings menu 10
63
En
English
Italiano
Français
Nederlands
Español
Deutsch
• If you set to DTS with non-DTS compatible
equipment, noise will be output when you
play a DTS disc.
• DTS-CDs are always output as DTS digital
audio regardless of this setting.
Linear PCM Out
• Default setting: Down Sample Off
If the connected component is compatible
with high sampling rates (96 kHz), set this to
Down Sample Off , otherwise set it to Down
Sample On (96 kHz audio is converted to a
more compatible 48 kHz). Check the manual
that came with the other component if you’re
unsure whether it is 96 kHz compatible.
• Even when set to Down Sample Off ,
some discs will still output down-sampled
audio through the digital outputs (you
only get full sampling rate audio through
the analog outputs).
Video Output settings
TV Screen
• Default setting: 16:9 (Wide)
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan & Scan) . In Letter
Box mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also
Screen sizes and
disc formats on page 87.
Digital Audio Mode
Video Output
Language
Display
Options
Dolby Digital Out
DTS Out
Linear PCM Out
Down Sample On
Down Sample Off
Initial Settings
Digital Audio Mode
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
Initial Settings
NS03_ZFL.book 63 ページ ２００３年７月３１日 木曜日 午後７時０分