Pitco Frialator Electric Fryers SEH Series - Manual (Page 10)

L20-246 Rev 4 (05/13)
5
MULTIPLE LEVEL COMPUTER
PROGRAMMING INSTRUCTIONS
FIRST LEVEL PROGRAMMING
USING AND ENTERING FIRST LEVEL PROGRAMMING AND
PROGRAMMING FUNCTION KEYS
Press the key (display shows ), then enter pass word if needed.
If you are unable to remember the set pass word use (6684).
"PROGRAM"
TO CHECK ACTUAL TEMP.
TO CHECK SET TEMP.
TO CHECK COOK, SHAKE, AND HOLD TIMES THEN THE PRODUCT KEY DESIRED
TO ENTER BOIL MODE
NOTE: THE TIMES WILL BE DISPLAYED IN SEQUENCE PAUSING MOMEN-
TARILY ON EACH TIME AND THEN RETURN TO COOK MODE.
enter ( if using ºC mode) when last digit of
temperature is entered, boil mode will start automatically. You
must turn off both fryers to exit Boil mode.
After 5 secs. machine will return to run mode.
After 5 secs. machine will return to run mode.
CHECKING THE REMAINING TIME WHEN USING MULTIPLE TIMERS
TO VIEW REMAINING TIME ON ANY FUNCTION KEYS WHEN MULTIPLE TIMERS ARE COUNTING IS AS FOLLOWS:
PRESS THEN PRESS FUNCTION KEY OF ANY NON DISPLAYED ACTIVE TIMERS YOU WANT TO VIEW
TO PROGRAM SINGLE OR DUAL TANK
COMPUTER SET TEMP LEFT SIDE
TO PROGRAM DUAL TANK
COMPUTER SET TEMP RIGHT SIDE
TO SAVE OR EXIT
TO SET
TO SET
TO SET
TO SAVE OR EXIT
ENTER DESIRED TEMP.
COOK TIME AND A PRODUCT KEY THEN
ENTER TIME
SHAKE TIME ENTER TIME
HOLD TIME ENTER TIME AND
PRODUCT KEYS
TIME KEY TEMPERATURE KEY PROGRAM KEY POWER ON/OFF KEY POWER ON/OFF KEY