Pentax R-315EX(NX) - Manual (Page 54)

54
17. Selection for Automatic illumination
power-off function: [ILLU. OFF]
Select the time interval (3, 5 or 10 minutes) for activating
the automatic illumination power-off function
or select NIL, disabling the function.
18. Selection for Distance measurement buzzer: [DIST. BUZ]
Select whether to enable or disable the beep when the
prism receives a light during distance measurement or
during repeated distance measurement.
19. Selection for H. angle 90° buzzer: [QUAD BUZ]
Select whether to enable or disable the beep at
every 90° during angle measurement.
20. Selection of Distance measurement signal: [MEAS. SIGNAL]
Select whether to display a signal indicator or AIM value
to be displayed from when distance measurement is started
to when measured data is displayed.
21. Selection of Automatic distance measurement: [AUTO MEAS.]
Automatic distance measurement repeats measurement
automatically when the telescope has been collimated
at the prism. Select NIL, MEAS or TRACK.
22. Selection for priority Display: [PRIORITY DISP]
Select the display order of the sets of display items which
pressing the [DISP] key cycles through. The set of display
items selected here appears first after the power is turned on.
1. 3 MIN
2. 5 MIN
3. 10 MIN
4. NIL
1. ON
2. OFF
1. OFF
2. ON
1. MARK
2. VALUE
1. NIL
2. MEAS
3. TRACK
1. HA HD VD
2. HA VA SD
3. HA VA HD
SD VD