Philips 64PH9901 - Manual (Page 29)

ATSC D
IGITAL
O
N
-
SCREEN
M
ENU
F
EATURES
DTV Setup Complete
Auto Program
Autoprogramming in progress.
This may take several minutes.
Cancel
Installing
ATSC ATSC
DTV Main Menu
Picture
Sound
Speakers
Features
DTV Setup
Exit
+ +
+ +
mute
volume
channel
M
exit
menu
TV
Analog DTV 4/4
1
2
3
Would you like to program DTV channels?
This process may take several minutes.
Yes, full installation
No
Yes, add new channels
DTV Setup
1
2
Full Installation
Install with Program and System Info
Install without Program and System Info
Cancel
DTV SETUP (AUTOPROGRAM)
S MART H ELP
29
DTV Main Menu Picture
Sound
Speakers
Features DTV Setup Exit
Press the Pronto remote’s “DTV” (or the “Source”
button on the DPTV’s local keyboard) to select the
ATSC operating mode.
• Standards were devised as part of the ATSC system
to allow TV stations to transmit Program Service
Information Protocol (or PSIP) for DTV channels.
This information system would allow stations to
broadcast various electronic on-screen program
guides in order to inform digital TV viewers of
station channel locations and availability of
programs.
Not all initial digital broadcast programs contain, or
will be available with, the PSIP program guides. The
64PP9901 DPTV provides two separate Full
Installation digital channel autoprogramming options,
based on whether PSIP information is present or not.
You may want to initially use the “Install Without
Program and System Info” option in order to display
and program the DTV channels, and avoid any
difficulties in first time setup or autoprogramming of
the DPTV.
Program and System Information (PSIP)
O nce connected to receive
digital ATSC broadcast
signals, available area channels
can be added into the DPTV’s
channel scan memory by the use of
the DTV Setup Menu.
Note: Refer to the 64PP9901
Quick Use guide for additional
information on digital channel
programming and direct ATSC
channel selections or access.
Select DTV Setup control.
With the DTV Main Menu on-
screen, move the highlight with the
MENU (M) ▲▼ buttons. Then
press the MENU button.
Press the MENU ▲▼ buttons
to select the Full Installation
option, then press the Menu button.
Press the MENU ▲▼ buttons
to select the “With” (or “Without”)
Program and System Information
option for autoprogramming, and
then press the Menu button.
Note: See the Program and System
Information box to the right for
further explanation and details on
PSIP and how it is to be used.
The DPTV shows an Installing
indicator bar on-screen as the
digital channels are added into
scan memory.
"DTV Setup Complete" shows
when the DPTV is through adding
digital channels into memory.
Press the “exit” (or Menu)
button to clear the screen.
1
2
3
BEGIN
4
Note: With the “full
installation” Auto Program
option the DPTV rewrites its entire
digital channel scan “map”
currently held in memory.
The “add new channels” Auto
Program option allows you to retain
the current DPTV channel scan
memory map, and include only the
new digital channel stations as they
become available for selection.