Frequently asked questions, 3 when a function does not work, check here, When a function does not work, check here – Panasonic KX-FP145 User Manual
Page 62: 3 when a function does not work, check here, 1 initial settings, 2 general, Help 60

9. Help
60
For Fax Advantage assistance, call 1-800-435-7329.
L
The unit is checking that there is no slack or 
crease on the ink film. Wait for a moment 
while the check is completed.
—————————————————————
REDIAL TIME OUT
L
The other party’s fax machine is busy or has 
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L
The document is jammed. Remove the 
jammed document (page 66).
—————————————————————
TRANSMIT ERROR
L
A transmission error occurred. Try again.
—————————————————————
UNIT OVERHEATED
L
The unit is too hot. Stop using the unit for a 
while and let the unit cool down.
Frequently Asked Questions
9.3 When a function does 
not work, check here
9.3.1 Initial settings
I cannot hear a dial tone.
L
If you used a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall jack directly. If the unit operates properly, 
check the splitter.
L
Disconnect the unit from the telephone line 
and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your telephone company.
L
The power cord or telephone line cord is not 
connected. Check the connections.
L
If you connected the fax machine through a 
computer modem, connect the fax machine 
directly to a telephone line jack.
I cannot make calls.
L
The dialing mode setting may be wrong. 
Change the setting (feature #13, page 51).
The unit does not ring.
L
The ringer volume is turned OFF. Adjust it 
(page 20).
L
The TAM ring setting of feature #06 is set to 
“
RINGER OFF”. Change to another ring
9.3.2 General
The unit displays “
CHECK PAPER” though the
paper is inserted.
L
The paper is inserted halfway. Insert it 
correctly (page 12) and press {START} to 
clear the message.
The other party complains they only hear a 
fax tone and cannot talk.
L
FAX ONLY mode is set. Tell the other party 
the number is only used for faxes.
L
Change the receiving mode:
–
TAM/FAX mode (page 35) or TEL mode 
(page 34)
L
If you use a Distinctive Ring service, make 
sure you have set the same ring pattern 
assigned by the telephone company (page 
38).
FP145.book Page 60 Thursday, January 15, 2004 10:46 AM
