Panasonic KX-FP145 User Manual
Page 35
4. Fax
33
4.4.3 Erasing a stored item from
the broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired item you want to erase.
L
To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L
To erase other items, repeat steps 5 to 7.
8
Press {STOP}.
4.4.4 Sending the same
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 30).
3
Press {BROADCAST}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling
each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L
If you select “
FINE”, “SUPER FINE” or
“
PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
L
If the document exceeds the memory
capacity, sending will be canceled.
L
If a party is busy or does not answer, it will be
skipped and redialed later.
To send the same document to a one-time
group of parties
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display “
TIME BROAD>”. 4. Press {SET} to start programming the items you want to transmit to. 5. Press {A} or {B} repeatedly to display the desired item. 6. Press {SET}. L To program other items, repeat steps 5 7. Press {SET} to start transmission to the programmed items. To cancel broadcast transmission 1. Press {STOP} while the unit displays “ BROADCASTING”. The display will show “ SEND CANCELED?”. 2. Press {SET}. FP145.book Page 33 Thursday, January 15, 2004 10:46 AM
and 6 (up to 20 items).
L