Panasonic GP-US932CUS User Manual

Page 27

• Try to change the setting of "DTL MODE".

• Is the lens aperture appropriately adjusted?

Check whether the aperture is appropriately adjusted.
Use lenses with recommended F number or higher and

3CCD-specific lenses.

Symptom

Blurred screen

Plural edges visible

"AWC OK" not displayed

Black bars at right and left of
image

Vertically longer image

No sound from monitor

• When the screen is too bright, narrow the lens aperture or

set "ELC" to "ON".

• This phenomenon depends on the specifications of the

monitor.

Select the wide and full screen display at the monitor side.

• This unit provides outputs on the assumption that the screen

is 16:9.

Select the wide screen display at the monitor side.

• The monitor is not applicable to sound output.

—

Cause/solution

Reference

pages

• Try to change the monitor cable.

—

14, 18

—

This manual is related to the following products: