Panasonic GP-US932CUS - Manual (Page 16)

v
To return to the camera image screen after storing the
settings, move the cursor to "END" and press the [SEL]
button.
The settings can be stored even if the power of the
CCU is turned off.
■ Basic operations
The description below explains how to operate the SETUP
menu basically.
First of all, the explanation provides how to display the
SETUP menu on the connected monitor used for adjust-
ment.
Important:
• The following functions are not available when the cam-
era head is not connected.
• Startup of white balance AWC
• MATRIX
• ELECTRIC ZOOM
• FREEZE
z
Hold down the [FREEZE (MENU)] button for approx. 2
seconds.
→
The top screen of the SETUP menu appears.
x
The SETUP menu consists of 2 pages.
To change the page, move the cursor to "P1" or "P2"
and press the [e] or [f] button.
Note:
• The cursor is a blinking part.
c
Perform the settings for each item.
• Selection of setting item:
Press the [g] button or the [h] button to move the
cursor.
• Change of settings:
Press the [e] button or the [f] button.
• Display of advanced setup screen:
Press the [SEL] button when "*" is attached to the
target setting item.
• Return to previous setup screen:
Move the cursor to "RET" and press the [SEL] but-
ton.
16
** SET UP ** P1
CAMERA ID *OFF
ELC *OFF
SHUTTER OFF
GAIN OFF
SENS UP OFF
OUTPUT SEL RGB(NOR)
END
** SET UP ** P2
SCENE FILE *FILE1
WHITE BAL AWC
BLACK BAL *MANU
SYNC INT
ELECTRIC ZOOM ON
FREEZE ON
END
Top screen of SETUP menu