Perle Systems MEDIA CONVERTERS S-1110DPP - Manual (Page 8)

Perle PoE/PoE+ Ethernet Media Converter
Installation Guide
8
Powering Options Jumper Settings
Note: In most cases the Power Option Jumper will not need to
be changed, in the rare case that you need to modify the
Power Option Jumper settings, the procedure is below.
In order to select a powering option, the Power Options Jumper
settings must be set. Each copper port has a set of Power Option
jumpers. To access the Powering Options Jumper settings,
unscrew the six side screws on the case and remove the cover
plate. Locate the Power Option jumper set and strap the option
pins as detailed below.