Perle Systems MEDIA CONVERTERS S-1110DPP - Manual (Page 2)

Perle PoE/PoE+ Ethernet Media Converter
Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle Standalone PoE/PoE+ 10/100/1000
rate converting Media Converters (S-1110P). These products have
the ability to convert 10/100/1000Base-T cable connections
(copper) to 100/1000Base-X connections (fiber). The Perle media
converters function as a PoE switch, and support a variety of port
configurations, including single or dual UTP and fiber ports. These
media converters function as Power Sourcing Equipment (PSE)
and can power either one or two Powered Devices (PDs) using
standard UTP cables that carry Ethernet data. The S-1110P
models are compatible with Powered Devices that comply with the
IEEE 802.3af standard and the S-1110PP models are compatible
with Powered Devices that comply with both the IEEE 802.3af and
the 802at-2009 standard. The fiber connection can be either single
mode (SM) or multimode (MM) and can operate over different
wavelengths and distances, depending on the model selected
(see table below).
2 Port Models
PoE (P)
PoE+ (PP) Connector
(xx) Mode
Distance Wavelength
(TX/RX)
S-1110P-M2xx05
S-1110PP-M2xx05
SC/ST
MM
550 m/1804 ft.
850 nm
S-1110P-S2xx10
S-1110PP-S2xx10
SC/ST
SM
10 km/6.2 mi.
1310 nm
S-1110P-S1SC10U
S-1110PP-S1SC10U
SC
SM
10 km/6.2 mi.
1310/1490 nm
S-1110P-S1SC10D
S-1110PP-S1SC10D
SC
SM
10 km/6.2 mi.
1490/1310 nm
S-1110P-S1SC20U
S-1110PP-S1SC20U
SC
SM
20 km/12.4 mi.
1310/1490 nm
S-1110P-S1SC20D
S-1110PP-S1SC20D
SC
SM
20 km/12.4 mi.
1490/1310 nm
S-1110P-S2xx40
S-1110PP-S2xx40
SC/ST
SM
40 km/25 mi.
1310 nm
S-1110P-S1SC40U
S-1110PP-S1SC40U
SC
SM
40 km/25 mi.
1310/1490 nm
S-1110P-S1SC40D
S-1110PP-S1SC40D
SC
SM
40 km/25 mi.
1490/1310 nm
S-1110P-S2xx70
S-1110PP-S2xx70
SC/ST
SM
70 km/43.5 mi.
1550 nm