Patton electronic SmartNode 5200 - Manual (Page 44)

Introduction 44
SmartNode 5200 Getting Started Guide E • SmartNode 5200 factory configuration
Introduction
The factory configuration settings for SmartNode 5200 are as follows:
#----------------------------------------------------------------#
# #
# 5200 #
# R3.xx BUILDxxxxx SIP #
# 2005-08-25T00:00:00 #
# Factory configuration file #
# #
#----------------------------------------------------------------#
dns-client server 10.56.128.44
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system hostname AA1
system
ic voice 0
low-bitrate-codec g729
profile napt NAPT
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
dtmf-relay rtp
rtp traffic-class local-default
profile pstn default
profile ringing-cadence default
play 1 1000
pause 2 4000
profile sip default
profile dhcp-server DHCP
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299