Patton electronic SmartNode 5200 - Manual (Page 37)

Data connectivity 37
SmartNode 5200 Getting Started Guide B • Specifications
Note Refer to the software feature matrix for the most up-to-date specifications.
Data connectivity
10/100Base-TX Ethernet WAN port
4-port 10/100Base-TX Ethernet LAN switch
All ports full duplex, autosensing, auto-MDX
Voice signalling
SIPv2
H.323v4
SIP call transfer, redirect
Overlap or en-bloc dialing
DTMF in-band, out-of-band
Configurable progress tones
IP services
IPv4 router; RIPv1, v2 (RFC 1058 and 2453)
Programmable static routes
ICMP redirect (RFC 792); Packet fragmentation
DiffServe/ToS set or queue per header bits
Pocket Policing discards excess traffic
802.1p VLAN tagging
IPSEC AH & ESP Modes
Manual Key; IKE optional
AES/DES/3DES Encryption
Note To use the IPSec VPN capabilities including AES/DES/3DES encryption with
the SmartNode 5200, you may need to purchase additional license keys.
Note The SmartNode 4562 is loaded with the VPN license from the factory.
Management
Industry standard CLI with remote Telnet access
HTTP web management and firmware loading
TFTP configuration & firmware loading
SNMP v1 agent (MIB II and private MIB)
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299