Polycom 1725-32504-001 - Manual (Page 21)

Using the Basic Features of Your Phone
2 - 5
To switch where the audio is received:
>>
In the Microsoft Lync 2010 conversion window do the following:
— Click the Switch Audio Device icon.
— Select another device from the list.
Ending Calls
To end a call:
>>
Do one of the following steps:
— Replace the handset.
— Press the Speakerphone key if you are using the speakerphone.
— Press the Headset key if you are using the optional headset.
Redialing Numbers
The last placed call is any of the following:
• The call you just completed on your phone
• The call you just completed using Microsoft Lync 2010
• The number you entered on your phone, but the call was unsuccessful
• The number you entered using Microsoft Lync 2010, but the call was
unsuccessful
To redial the last placed call:
>>
Press the Redial key.
If you press the Redial key and have not previously made any calls, the
phone will not respond and no message is displayed.
Note
The information about the last call is stored in the computer to which the phone is
connected. If you disconnect the phone from one computer and connect it to
another computer that is running Microsoft Lync 2010, and then you press the
Redial key, the phone will redial the last number called based on the information in
the second computer.