Polycom 1725-32504-001 - Manual (Page 15)

Getting Started with Your Phone
1 - 9
To change the volume key response rate settings:
1
After you press the 5 dial pad key during startup, press 1 to continue with
device settings, and then press 1 again to continue.
2
Press 1 for volume key settings.
The message “You can adjust the rate which volume will increase or
decrease when holding down the volume buttons.” is displayed.
Continue pressing 1 to read through the message.
3
Select a volume press response rate.
The possible values are 1 (slow), 2, (standard), and 3 (fast).
4
When prompted with “Use the volume button response
rate? YES (1) Cancel (*)”, press the appropriate key.
If you press 1, the volume key press response rate is saved.
5
Press * to exit.
Call Volume Setting
The volume can be set to one of two levels:
• The system default level
• The level that was used in the previous call
To change the volume settings of your call:
1
After you press the 5 dial pad key during startup, press 1 to continue with
device settings, and then press 1 again to continue.
2
Press 2 for more options, and then press the 1 dial pad key for call volume
settings.
The message “You can restore volume to default, or preserve volume level
from your last call.”
Continue pressing 1 to read through the message.
3 Press 1 to preserve the level from previous call or 2 for default level.
The message “Each call starts with volume level.” is
displayed.
4
Press * to exit.
Text Size Setting
Two font sizes are supported for most languages:
• A normal size
• A larger size (factory default)