Pioneer DRM-7000 - Manual (Page 32)

32
En
¶ Import-log
Import log is a sequential list of all disc slot numbers in
which discs have been newly inserted into the changer
when operating in mailslot submode (see p. 34).
The slot numbers displayed include the slot numbers not
only for discs which have been added but also discs which
have been replaced in mailslot submode. Note that discs
in normal-type 50-disc magazines which have been added
are displayed as a magazine unit.
Press « key
≠
Press « key
≠
Contents
Contents information of the changer may be retrieved in order
to browse the status of all slots within the changer.
Press « key Press » key
≠ ±
Note that the number displayed under the heading
“Uncertain” indicates the number of slots for which the
changer is still uncertain whether the slot is empty or full.
Info submode
The DRM-7000/DRM-3000 stores data needed in order for
system administrators to perform daily maintenance in non-
volatile memories, and info submode may be used to browse
these data.
If you press the ENT key at this point, the following menu
screen will appear which makes it possible to select the type
of information to be read.
Move the cursor to the type of information you need and
then press the ENT key.
Log
When you select log data browsing, it is possible to choose
either error-log or import-log data.
Move the cursor to either “Error-log” or “Import-log” and
press the ENT key to browse the corresponding log data.
¶ Error-log
The Error-log is a recorded history of operating errors
detected by the changer. Errors are numbered from the
most recent (1) up to a maximum of 32.
Moving the cursor to an error code and pressing the ENT
key causes a description of the type of error in question to
be displayed.
Press the ENT key gain to display detailed data regarding
the type of error.
Press the ENT key
≠
Press the ENT key
≠
Operation
Example of display for DRM-7000
Example of display for DRM-7000