Pioneer DRM-7000 - Manual (Page 25)

25
En
English
Operation
Press
« key
Press
» key
Inquiry submode
Config submode
Option submode
Info submode
Mailslot submode
Hyper submode
Probe submode
Door submode
Press « key Press » key
Press « key Press » key
Press « key Press » key
Press « key Press » key
Press « key Press » key
Press « key Press » key
Press « key
Press « key Press » key
Auto probing
Hot start
Auto eject
Hyper I/E
Alert buzzer
FAN NG message
Press « key Press » key
Press « key Press » key
Press « key Press » key
Press
« key
Press
» key
Press
» key
Press » key
Press
« key
Log
Contents
Run-statistics
Swap
Remove
Add
NOTE:
The DRM-7000/DRM-3000 is designed so as to prohibit the
use of maintenance submodes from the host computer. Note
that while it is possible to enter system administrator mode
even though the use of these submodes is prohibited, only
the information submodes will be able to be used.
System administrator mode settings screen are displayed in
the sequence indicated below.
Pressing the ESC key when in inquiry submode will cause
the system to return from system administrator mode to user
mode.
Press the ENT key
Press the ENT key to select
a category and then press
the ENT key again
Press the ENT key to select
the operation to be
performed and then press
the ENT key again
Free message
Inquiry change
Press « key Press » key
Press « key Press » key
NOTES:
¶ Do not change the setting of the Inquiry change
function. Units are preset at the factory to DRM-
7000 (for DRM-7000 model) and DRM-3000 (for
the DRM-3000 model).
¶ Do not change the setting of the FAN NG
message function. Units are set to factory
default of ON.