Panasonic CAMERA MANAGEMENT SYSTEM BB-HGW700A - Manual (Page 20)

Installation/Troubleshooting
20
Notes
• When registering or editing, restart all PCs connected to the LAN (home) side.
• When adding more PCs after setup has been completed, connect the new PCs to jacks
LAN1 to LAN4 and then restart.
6.
When setup is complete, click [Save and Go to
Connection Mode].
• The connection mode page is displayed.
7.
Select the ISP entered in step 4.
8.
When setup is complete, click [Save].
• The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.
When [Restart] is displayed on the setup page,
click it.
10.
Restart the PC.
• Check that the PC is connected to the
Internet.