Philips AV-HS300G - Manual (Page 47)

47
5. Image transmission functions
This unit comes with a function for transmitting still images from the host computer to the unit via Ethernet and
a function for importing still images from the unit into the host computer. The image transmission program must
be installed in the host computer from the CD-ROM supplied in order to use these functions. For details on
installation, refer to “How to install the program”.
Specifications
Run the image transmission program (HS300 Tool) in a host computer which satisfies the following conditions.
• Operating system: Windows 000 or Windows XP
• Processor:
Pentium III, 1 GHz or better recommended
• RAM: 56 MB or more recommended
• Hard disk drive: At least 50 MB of free memory
• Ethernet: 10BASE-T or 100BASE-TX
• Display: TrueColor (4 bit, 3 bit color), 800  600 dots or more
The image formats supported include bitmap (bmp), JPEG (jpg), TIFF (tif), GIF (gif) and PNG (png).
The image transmission program is equipped with a function for automatically converting images into the specified
video format size.
Connections
Connect this unit to Ethernet using a twisted pair cable. Use a LAN crossover cable to connect the unit with the
host computer directly. Use a LAN straight cable to connect to Ethernet using a hub or other equipment.
For details on network setup such as IP addresses, refer to [3-7 Network settings].
Transmitting images uses network capacity which may result in other connected devices possibly being affected
when connecting to Ethernet through a hub and other equipment.
LAN crossover cable
LAN straight cable
HUB
LAN straight cable