Panasonic PANAFAX UF-333 User Manual

Page 90

Receive To Memory

Printing Out Documents

After receiving a document with the Receive To Memory feature, the following message will appear on the
display.

To print the document, follow the steps below.

FUNCTION

SET

Enter the password to print the documents.
(see Note 1)

Ex: 1 2 3 4

SET

Machine will start to print the documents.

1. If the password has not been set, your machine will not prompt you to enter the password.

The documents will be printed immediately after pressing

SET

in step 4.

2. Once you set RCV TO MEMORY feature to On, the password cannot be changed (Fax Parameter No.

37 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY
feature to Off first. Then change the password (see page 85).

05007000001

05007020003

05007050001

05007990001

04002060009
#@multitude

05007060003

05007060006

05007060007

05007060008

05007060009

Note:

05007070003

05007070004

MESSAGE IN MEMORY

< RCV TO MEMORY >

SELECT MODE (1–5)

ENTER NO. OR

Ɵƞ

RCV TO MEMORY=ON

1:OFF 2:ON 3:PRINT

RCV TO MEMORY=PRINT

1:OFF 2:ON 3:PRINT

INPUT PASSWORD

1234

* PRINTING *

MEMORY RCV’D DOC