Troubleshooting – Panasonic PANAFAX UF-333 User Manual

Page 128

124

Troubleshooting

Replacing the Battery

During the initial self test, when the power is turn ”On”, the machine will evaluate the condition of the back
up battery. If the battery is weak or fully discharged, the following message will be shown on the display.

REPLACE BATTERY

INFO. CODE=026

To replace the battery, follow the procedure below:

Print a File List to confirm that there is no file stored in memory. (See Note 1)

To print a File List, press FUNCTION , 9 , 1 and

SET

ࠡ

Disconnect the Power Cord.

ࠢ

Remove the Memory Card Cover.

ࠣ

Remove the Battery by sliding it inward and

then out of the socket.

CAUTION

Dispose the battery properly and keep it

away from small children.

ࠡ

Install the new battery (Order No.: CR 2032)

with the

⊕

side facing out.

ࠢ

Re-install the Memory Card Cover.

ࠣ

Connect the Power Cord.

If the clock is flashing on the LCD Display, follow the procedure on page 24 to reset the clock.

1. If the power is turned ”Off” and the battery is weak or fully discharged, the transmit and polling information

of a file stored in memory may be lost. However the received document(s) in memory will be preserved and
will print out automatically after the power is restored.

2. The service life of the battery is approximately 1 year when the machine is turned ”Off”.

08001000001

08001020019

08001050024

08001050025

08001060073

ࠢ

ࠣ

08001060067

ࠡ

ࠢ

08001060068

08001060074

Note:

08001070012

08001070014