User parameters – Panasonic PANAFAX UF-333 User Manual
Page 31

27
User Parameters
Setting Your ID Number (Fax Telephone Number)
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine’s display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (max. 20 digits)
FUNCTION
7
1
SET
repeatedly until display shows;
Enter your ID (max. 20 digits) by using the key pad and
SPACE .
Ex: 2 0 1
SPACE 5 5 5
SPACE 1 2 1 2
If you make a mistake, press CLEAR to erase the
number then reenter the correct number.
SET
STOP
1. You may use
to enter a ”+” character at the beginning of the ID number to indicate the following
digit(s) for your country code.
Ex : +1 201 555 1212
+1 for U.S.A. country code.
+81 3 111 2345
+81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this User’s Guide)
02009000001
02009020004
02009050005
02007060008
#@multitude
02009060001
#@multitude
02009060008
02009060009
02007060005
#@multitude
Note:
02009070008
02009070009
SET MODE (1–4)
ENTER NO. OR
Ɵƞ
1:USER PARAMETERS?
PRESS SET TO SELECT
ID NO.
ID NO.
201 555 1212
2
1
2
3
4
5