Perle Systems 5500208-41 - Manual (Page 72)

Custom Factory Default
72 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1
Netsave
Description Transfers a file from the IOLAN to a remote host using the TFTP protocol.
User Level Admin
Syntax
Options configuration
Specifies that you are going to upload a configuration file from the IOLAN to the
specified host or IP address.
crash
Specifies that you are going to upload a crash file from the IOLAN to the specified host
or IP address.
serialt-buf
Specifies that you are going to upload the contents of the serial trace buffer.
text-config
<hostname/ip_address>
The IP address or host name for where the file you are uploading from the IOLAN is
going. If you are using a host name, it must be resolved in either the IOLAN’s Host
Table or a DNS server.
<filename>
The complete path and file name (cannot use a drive letter) for the file you are
uploading from the IOLAN.
Custom Factory Default
Netload
Description Transfers a file from a remote host to the IOLAN using the TFTP protocol.
User Level Admin
Syntax
Options
factory-default-config
<hostname/ip_address>
The IP address or host name where the file you are downloading to the IOLAN resides.
If you are using a host name, it must be resolved in either the IOLAN’s Host Table or a
DNS server.
<filename>
The complete path and file name (cannot use a drive letter) of the file you are
downloading to the IOLAN.
netsave configuration|crash|serialt-buf|text-config
<hostname/ip_address> <filename>
Saves the current configuration to a text file on a TFTP server.
netload factory-default-config <hostname/IP_address> <filename>
Specifies the configuration file that you are going to load from a TFTP server to the
IOLAN that will act as the factory default configuration. See the User Guide for
directions on how to revert back to the original factory default configuration, if
required.