Perle Systems 5500208-41 - Manual (Page 22)

TruePort Baud Commands
22 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1
Show Modbus
Description Displays the Modbus Gateway parameters.
User Level Admin
Syntax
TruePort Baud Commands
Set TruePort Remap-Baud
Description This command allows for the remapping of the baud rate being specified by the Serial
application to a different value on the physical serial port on the IOLAN.
User Level Admin
Syntax
Options 50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400|
57600|115200|230400|28800|[custom <baud_rate>]
Show TruePort
Description Shows the IOLAN TruePort remapping table.
User Level Normal, Admin
Syntax
show modbus gateway
show modbus slave|master <line_number>
set trueport remap-baud
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400|57600|115200|230400|28800|[custom <baud_rate>]
The configured baud rate of the TruePort client.
The actual baud rate that runs between the IOLAN and the connected serial device. You
can also specify a custom baud rate; valid values are 50-230400.
show trueport