Telnet – Perle Systems 5500208-41 User Manual
Page 31
31
Commands for Users Logged Into the IOLAN
Telnet
Description Starts a telnet session to the specified host/IP address.
User Level Normal, Admin
Syntax
telnet <hostname/IP_address> [<tcp_port>]
[termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off]
[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]
[quit <00-7f>] [escape <00-7f>]
Options
<hostname/IP_address>
The name (resolvable via DNS) or IP address of the host you wish to connect to with
Telnet.
<tcp_port>
The port number the target host is listening on for incoming connections. The default
for Telnet is port number 23.
termtype
Type of terminal attached to this line; for example, ANSI or WYSE60.
line-mode
When
On
, keyboard input is not sent to the remote host until
Enter
is pressed,
otherwise input is sent every time a key is pressed. Default is
Off
.
map-cr-crlf
Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is
Off
.
local-echo
Toggles between local echo of entered characters and suppressing local echo. Local
echo is used for normal processing, while suppressing the echo is convenient for
entering text that should not be displayed on the screen, such as passwords. This
parameter can only be used when
Line Mode
is
On
. Default is
Off
.
echo
Defines the echo character. When Line Mode is On, typing the echo character echoes
the text locally and sends only completed lines to the host. This value is in hexadecimal
with a default value of
5
(ASCII value
^E
).
eof
Defines the end-of-file character. When Line Mode is On, entering the eof character as
the first character on a line sends the character to the remote host. This value is in
hexadecimal with a default value of
4
(ASCII value
^D
).
erase
Defines the erase character. When Line Mode is Off, typing the erase character erases
one character. This value is in hexadecimal with a default value of
8
(ASCII value
^H
).
intr
Defines the interrupt character. Typing the interrupt character interrupts the current
process. This value is in hexadecimal with a default value of
3
(ASCII value
^C
).
quit
Defines the quit character. Typing the quit character closes and exits the current telnet
session. This value is in hexadecimal with a default value of
1c
(ASCII value
FS
).