Philips CAR ENTERTAINMENT SYSTEM CE120 - Manual (Page 22)

22
Select shock-protect setting
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road..
1
Press MENU / DISP for 3 seconds.
2
Press DBB or SEARCH repeatedly until
[ESP] is displayed.
3
Turn to select a setting:
[ESP 12] : select when the road is
smooth and there are few bumps.
[ESP 45] select when the road is
bumpy and unstable.
4
Press to confi rm the selection.
Reset
You can reset the unit to its default setting.
1
Detach the front panel (see ‘Detach the
front panel’ on page 24 ) .
2
Press the reset button by using a ball-point
pen or a similar tool.
All settings are erased except clock.
•
•
»
RESET RESET
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU / DISP for 3 seconds.
2
Press DBB or SEARCH repeatedly
to until [BEEP ON] or [BEEP OFF] is
displayed.
3
Turn to select a setting:
[BEEP ON] : Turn on the beep sound.
[BEEP OFF] : Turn off the beep sound.
4
Press to confi rm.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
If any special characters are present in the MP3 track
name or album name, it may not display correctly on
the screen because these characters are not supported.
Some WMA is protected by Digital Rights Management
(DRM), it cannot be played on the unit.
Folders/fi les exceed the supported limit of the unit are
not displayed or played. •
•
•
1
Press MENU / DISP for 3 seconds.
2
Press DBB or SEARCH repeatedly
to until [ROLL ON] or [ROLL OFF] is
displayed.
3
Turn to select a setting:
[ROLL ON] (scroll on): Auto scroll
during play.
[ROLL OFF] (scroll off): No auto
scroll display.
4
Press to confi rm.
•
•
•
•
ENG
CE120_IFU_ENG.indd Sec1:22 CE120_IFU_ENG.indd Sec1:22 2008-10-10 14:37:30 2008-10-10 14:37:30