Philips CAR ENTERTAINMENT SYSTEM CE120 - Manual (Page 14)

14
4
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
5
Connect the supplied mounting bolt to the
unit.
6
Place the supplied rubber cushion over the
end of the mounting bolt.
•
•
2
Remove the mounting sleeve with the
supplied disassembly tools.
3
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
Skip this step if the unit is not fi xed by
sleeve but supplied screws. •
183 mm
52mm
5 mm
183 mm
52mm
5 mm
ENG
CE120_IFU_ENG.indd Sec1:14 CE120_IFU_ENG.indd Sec1:14 2008-10-10 14:37:19 2008-10-10 14:37:19