Philips DTR2610/28 - Manual (Page 7)

3 Product description
3.1 Front view
1 Smartcard slot
2 LOW POWER button: Switch the receiver on or to "low power".
3 TV/RADIO button: Toggle between digital TV and digital radio.
4 "-" button: Channel down.
5 Bicolour LED: Display receiver status (see status indicator table).
6 Red LED Display receiver status (see status indicator table).
Blink at remote control command reception.
7 "+" button: Channel up.
STATUS INDICATOR TABLE
Note: if the red LED is blinking while your receiver is in "Standby", it indicates that an update of your
receiver software is taking place. Do not interrupt this operation. Wait for the green LED to light up,
indicating successful update, and then continue as normal.
Your receiver, as any electronic equipment, consumes power. In order to reduce power
consumption, please switch your receiver to either Standby or "Low Power" whenever you
are not using it. For maximum energy saving we recommend you switch off the receiver by
unplugging it from the mains if you are not using it for a long time.
Indicator
Mode
Bicolour LED Red LED
Low power red
Standby orange
TV/Radio mode green
Download in progress Blinking red
Timer active when receiver on green red
Timer active when receiver in standby orange red
En
gli
sh
6 PRODUCT DESCRIPTION
1 2 3
4 5 6 7