Philips DTR2610/28 - Manual (Page 10)

5 Day to Day operation
5.1 Turn on your receiver or switch to low power
Your receiver is in “low power”, as indicated by the left-hand LED lit in red. The only way to turn
it on is to press the LOW POWER button on the front panel.
While watching digital TV or listening to digital radio, press the LOW POWER button on the
front panel to switch your receiver to “low power”.
5.2 Wake up your receiver or switch to standby
While watching digital TV or listening to digital radio, press the standby key of the remote control
to switch your receiver to standby.
While your receiver is in standby, to wake it up:
- Either press the P+, P-, RADIO or any number key of the remote control.
- Or press the - / + or TV/RADIO button on the front panel.
5.3 Change channel
When you are watching digital TV or listening to digital radio, there are different ways of changing
channel.
5.3.1 Using number keys
Enter the desired channel number using number keys.
5.3.2 Using P+ and P-
Press P+ to select the next channel in the current list, or P- to select the previous channel in the
current list.
5.3.3 Using the channel list(s)
- Press the FAV key to open the current channel list.
- Scroll to the desired channel, and then press OK to
select it.
- Alternatively, press FAV, and then use the C or B to
enable another channel list to choose from.
TV Channel List
5.3.4 Using BACK (last channel recall)
Press the BACK key to return to the previously selected channel.
En
gl
is
h
DAY
-
TO
-
DAY OPERATION 9