beautypg.com

About recording, Basic information, Direct line recording (dlr) – Philips CDR820/17 User Manual

Page 20: Auto level control (alc), Adjusting the record level

background image

Basic information

We will describe:
– Recording from internal CD changer
– Recording from an external source
– Finalizing CDR(W) discs:

Finalizing a CDR(W) disc is a simple procedure, necessary
to:
– play a recorded CDR on a standard CD player;
– play a recorded CDRW on a CDRW compatible CD

player

– Unfinalizing CDRWdiscs:

Necessary to add new recordings to the disc or to erase the
disc

– Erasing from CDRWdiscs

0

The recording procedure is the same for CDR and CDRW
discs. Make sure that the CDR(W) is absolutely free of
scratches and dust particles.

0

It is advisable to use a CDRW disc for your first try.

0

For recordings, the minimum track length is 4 seconds.You
can record up to a maximum of 99 tracks on a disc.The
minimum of recording time left on the disc is 7 seconds.
Else, Disc Full is displayed and you cannot enter into the
record mode. If the length of the source material is longer
than the remaining recording time on the CDR(W) Does
Not Fit is displayed

0

CD TEXT on the original CD is recorded automatically.
When a track with copy protected text is encountered
Text Protect will be displayed.

Copyright protection
The Serial Copy Management System (SCMS) prevents the
making of a digital copy from a digital copy.The system allows
making a digital recording from the original, however in some
countries this may require the authorization of copyright
holders.

When you try to record a copy protected material from an
external source, Copy Protect will be displayed. No further
digital recording is possible then.

When you try to record a copy protected material from the
internal CD changer no digital recording is possible, however
the CD recorder will automatically switch to analog recording.
It is not possible to copy an MP3-CD.

Remarks on recording

0

Recording can be stopped manually by pressing STOP 9
otherwise recording will stop automatically.

0

During recording the elapsed recording time can be checked
by pressing DISPLAY.

Direct Line Recording (DLR)

The CD recorder is equipped with the high-performance
Direct Line Recording (DLR) technique. It ensures a perfect
recording of the source material, meaning a true “bit for bit”
recording. DLR will not be active, when ALC is used or when
the record level is adjusted.

Auto Level Control (ALC)

Auto Level Control ensures that the tracks on the recorded
disc have a similar volume level. Always the already recorded
tracks of the CDR(W) disc will be taken as reference for
the volume level of the following recordings.

Auto level control becomes automatically active,
when:
– COMPILE CD is being used,
– a disc, a track or a track edit is being high speed recorded

and the CDR(W) has recordings on it, or

– a program (consisting from more than one disc) from the

CD changer is being high speed recorded.

Auto level control will not become active, when:
– using COPY CD,
– making recordings from an external source, or
– making normal recordings in listen mode.

Switching ALC permanently off

1

If necessary press STOP 9 to stop playback.

2

Press CDR to select the CD recorder.

3

Press REC LEVEL to select:

ALC Off : ALC is permanently switched off.

0

To enable ALC press REC LEVEL again to select:

ALC On : ALC is enabled.

Adjusting the record level

You can adjust the reference record level for both digital
and analog recordings from the internal changer as well as
from external sources.This is also possible when ALC is
active.This feature can also be used for fading your
recordings in or out.

1

Select the recording source with CD1, CD2 or CD3 for
internal recording or with AUX for external recording.

2

Press REC LEVEL on the set to enable the
¡ EASY JOG ™ control to adjust the record level.

3

Rotate the ¡ EASY JOG ™ control to the left to adjust the
desired record level.

The actual record level (in dB) will be displayed.

Notes:

The record level from the internal changer can only be

adjusted during recording.

The loudest sounds on the source should not reach 0 dB

maximum (first red level).

About recording

20

English

xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 20

This manual is related to the following products: