Primera Technology SIGNATURE Z1 - Manual (Page 20)

20
LOADING THE RIBBON CARTRIDGE
5. Position the ribbon cartridge so that the ribbon passes under
the cartridge bar.
6. Press the ribbon cartridge against the carriage until the cartridge
is in line with the carriage bar.
7. Click the OK button on the cartridge dialogue box and the
cartridge will move back to the home position,
or “Cancel” to exit.
8. Close the printer access door.
1. Start the CD/DVD Printer Application
2. Click the “Change Cartridge” icon on the window
application to move the cartridge holder to the “change cartridge
position” or “cancel” to exit.
3. Open the printer access door.
4. Pull out the ribbon cartridge from its position.
Take care that the cartridge does not move, grip the ribbon
cartridge on both sides with your fingers and pull it out.
5. Replace with another ribbon cartridge by pressing it against
the carriage until the cartridge is in line with the carriage bar.
REPLACING THE RIBBON CARTRIDGE
Cartridge
Cartridge
Bar
Access door