Setup menus, Continued) – Panasonic AJ-HD1800P User Manual
Page 98
98
Setup menus
(continued)
*1
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, 50 Hz (HD,
SD) mode or 50 Hz mode is selected in System Menu No. 25
(SYSTEM FREQ), this item is not displayed.
*3
When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD,
SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.
No./Item
Description of setting
638*
1
IN U/C
MODE
For selecting the up-conversion picture frame
when SD SDI input signals are supplied.
0000
FIT-V
Side panel mode
0001
FIT-H
Top and bottom cut in vertical direction
0002
FIT-HV
Stretch mode
639
*1
I U/C RESP H
For selecting the horizontal frequency band
during the up-conversion of SD SDI input
signals.
0000
STD
0001 NARROW
640
*1
I U/C RESP V
For selecting the vertical frequency band
during the up-conversion of SD SDI input
signals.
0000
STD
0001 NARROW
641
*1
I U/C ENH
H
For accentuating the horizontal contours
during up-conversion of SD SDI input signals.
0000
0dB
0004
+1.5dB
0001
+0.7dB
0005
+2dB
0002
+1dB
0003
+1.2dB
approximations only.
642
*1
I U/C ENH
V
For accentuating the vertical contours during
up-conversion of SD SDI input signals.
0000
0dB
0004
+1.5dB
0001
+0.7dB
0005
+2dB
0002
+1dB
0003
+1.2dB
approximations only.
643
*2
IN BLK
LINE
For selecting the input method for line 20 and
line 21 of the video signal while the SD signal is
input
0000
OFF
Not blank
0001
ON
Blank
650
STYLE
0000 CMPNT*
Level adjustment mode for the component style
0001
CMPST
Level adjustment mode for the composite style
*
The asterisk denotes the factory setting for
AJ-HD1800E.
651
*3
HUE STYLE
(SD)
*DW
For selecting the rotational axis of the chroma
phase adjustment.
0000
Pb-Pr
The axis rotates in a perfect circle on the SDI
(component style) vectorscope.
0001
U-V
The axis rotates in a perfect circle on the analog
(composite style) vectorscope.
No./Item
Description of setting
653
Y LVL (HD)
*UP
For adjusting the Y level of the HD SDI output.
(
j to 0 dB to i3 dB)
0000
0.0%
:
:
1000
100.0%
:
:
1413
141.3%
selected as the setup menu item No.650 setting.
654
Pb LVL
(HD)
*UP
For adjusting the PB level of the HD SDI output.
(
j to 0 dB to i3 dB)
0000
0.0%
:
:
1000
100.0%
:
:
1413
141.3%
selected as the setup menu item No.650 setting.
655
Pr LVL (HD)
*UP
For adjusting the PB level of the HD SDI output.
(
j to 0 dB to i3 dB)
0000
0.0%
:
:
1000
100.0%
:
:
1413
141.3%
selected as the setup menu item No.650 setting.