Panasonic AJ-HD1800P - Manual (Page 92)

92
Setup menus
(continued)
(continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
313
CLICK POINT
When the search dial from intermediate
position turning to the right or the left with
SLOW mode, the speed in the click point is set.
0000 ±1
i/j1 time speed
0002 ±1.85
i/j1.85 time speed (i1.85/j1.5 times speed
for format DVCPRO HD-LP)
320 *1
EDIT RPLCE1
For setting the allocation of the channels for the
analog audio presets of a controller when a
controller without a function to control the edit
presets of the digital audio signals is used to
edit the digital audio signals of the VTR.
The VTR’s CH1 edit presets are set to ON or OFF
following the analog audio signals specified by the
controller.
0000 N-DEF
Not set.
0001 CH1
The analog CH1 edit presets are followed.
0002 CH2
The analog CH2 edit presets are followed.
0003 CH1+2
The analog CH1 or CH2 edit presets are
followed.
321 *1
EDIT RPLCE2
As with setup menu item No.320, the VTR’s CH2
edit presets are set to ON or OFF following the
analog audio signals specified by the controller.
0000 N-DEF
Not set.
0001 CH1
The analog CH1 edit presets are followed.
0002 CH2
The analog CH2 edit presets are followed.
0003 CH1+2
The analog CH1 or CH2 edit presets are
followed.
322 *1
EDIT RPLCE3
As with setup menu item No.320, the VTR’s CH3
edit presets are set to ON or OFF following the
analog audio signals specified by the controller.
0000 N-DEF
Not set.
0001 CH1
The analog CH1 edit presets are followed.
0002 CH2
The analog CH2 edit presets are followed.
0003 CH1+2
The analog CH1 or CH2 edit presets are
followed.
No./Item Description of setting
323 *1
EDIT RPLCE4
As with setup menu item No.320, the VTR’s CH4
edit presets are set to ON or OFF following the
analog audio signals specified by the controller.
0000 N-DEF
Not set.
0001 CH1
The analog CH1 edit presets are followed.
0002 CH2
The analog CH2 edit presets are followed.
0003 CH1+2
The analog CH1 or CH2 edit presets are
followed.
324
*1
EDIT RPLCEC
As with setup menu item No.320, the VTR’s CUE
edit presets are set to ON or OFF following the
analog audio signals specified by the editor or
controller.
0000 N-DEF
Not set.
0001 CH1
The analog CH1 edit presets are followed.
0002 CH2
The analog CH2 edit presets are followed.
0003 CH1+2
The analog CH1 or CH2 edit presets are
followed.